Product Manual

Owner's((Manual(|(REV(001( (
(
(
29(
Casters
• Check that locks on casters lock properly (if equipped).
• Check that all casters roll properly.
• Check Floor Brake mechanism for proper function (roll at any height model).
• Check head end caster alignment (Bale) mechanism to verify proper function
(roll at any height model).
NOTICE TO MAINTENANCE STAFF
• Carry out all adjustment and cleaning procedures as specified.
• Assembly of this bed and modifications made during the actual service life require
evaluation to the requirements of IEC 60601-1 and IEC 60601-2-38.
SERVICING
Actuators and Control Box are light gray.
ELECTRICAL SHOCK HAZARD
Possible Shock Hazard may occur if the Control Box is not unplugged from the wall outlet before
any maintenance is performed on Motor or Control Box.
ACTUATORS AND CONTROL BOX INFORMATION
Cord and Socket Identification
• Attendant Control (Green)
• Hand Held Pendant (Red)
• Head Section Motor (Black)
• Foot Section Motor (Yellow)
• Hi/Lo Motor (Blue)
• Battery Back-Up (Black)
Removing Control Box
• Unplug main power supply from the wall outlet
• Unplug connections for all actuators and accessories
• Separate the control box from the actuator
• Reinstall the control box on the actuator
• Plug all connections back into control box following color coding
• Test function