Product Manual

Owner's((Manual(|(REV(001( (
(
(
28(
SEMI-ANNUAL INSPECTION
• Perform all Quarterly inspections plus:
Control Box
• Check power cord for chafing, cuts or wear.
• Ensure all attachment hardware and brackets are tight.
• Check electrical connections for wear or fractures.
• Verify that all actuator connections are tight.
Actuators
• Check actuator cords for chafing, cuts or wear.
• Check to make sure actuators do not bind at any point throughout their full
range of motion.
Pendant
• Check pendant cord for chafing, cuts or wear.
• Check all pendant buttons for proper function.
Authorized Accessories
• Inspect all fasteners for looseness and wear. Replace or tighten as necessary.
• Ensure proper function of accessory.
• Ensure welds do not have stress fractures.
• Ensure no tubes are bent.
ANNUAL INSPECTION
• Perform all Semi-Annual inspections plus:
Mattress Support Surface, Frame and Base Assemblies
• Inspect welds on the mattress support surface, frame and base assemblies for
stress fractures.
• Verify all fasteners are tight.
• Inspect fasteners for wear or damage.
• Inspect bed and Assist Bars/Rails bolts, if loose tighten and if missing replace.
• Lubricate clevis pins at hinge points.
• Lubricate Hi/Lo tracks of bed for smooth travel.
Actuators
• Inspect push tubes and end connections of all actuators for excess wear or
bending.
• Verify that all clevis pins are in place.