Product Manual

Owner's((Manual(|(REV(001( (
(
(
26(
BED MOBILIZATION AND STABILIZATION
WARNING
Involuntary bed movement may take place if the floor lock or bed casters are left unlocked.
Involuntary bed movement may lead to property DAMAGE or resident INJURY. Never leave a
bed unattended while the floor lock is not engaged.
Floor Lock Operation (#15902C)
• Press the red side of the floor lock lever to engage.
• Press the green side of the floor lock lever to disengage.
• Floor lock system may be operated from either side of the bed.
CRUSH HAZARD
Possible Injury may occur when activating the Foot Lock Mechanism. This feature is
designed to be activated by your foot. Using your hand could result in injury.
Caster Lock (#15901C/15902C)
• To lock the head end of the bed use the locking casters at the head end of the bed.
• To lock the casters push down on the caster tabs near the top of the caster, this will
prevent the bed from moving.
• The #15901C is equipped with caster locks on the foot end of the bed as well. These
locks are engaged and disengaged the same way as the head end caster locks.
• To unlock the casters push up on the caster tabs near the top of the caster, this will allow
the bed to move in all directions.
CAUTION
Moving the bed while the floor lock or caster lock is engaged may cause DAMAGE to the bed.
Do not move the bed until the floor lock and caster lock are unlocked.
Head End Caster Alignment Mechanism
• Caster Alignment mechanism (Bale) is on either side of the head end caster truck.
• Align caster with the truck body and lower the bale over the caster.
• With the bale in place, the head end of the bed will tend to track in a straight line.