Product Manual

Owner's((Manual(|(REV(001( (
(
(
24(
EMBEDDED STAFF CONTROL PANEL OPERATION (OPTION, #15902C only)
4 Function
• This controller is located on the footboard
• Locking buttons can be engaged to not allow specific movements.
• The 1
st
button controls the raising and lowering of the head section.
o While in the locked position, this panel feature will not work.
• The 2
nd
button controls the raising and lowering of the foot section.
o While in the locked position, this panel feature will not work.
• The 3
rd
button controls the raising and lowering of the head and foot section
simultaneously (Auto Contour).
• The 4
th
button controls the raising and lowering of the bed frame.
o While in the locked position, this panel feature will not work.
POWER CORD STORAGE
• Power cord strain relief hook is located underneath the bed frame at the head of the
bed and keeps the power cord off the floor and protects the power cord from getting
severed or run over.
• If the power cord is not in place under the bed, untie the power cord and stretch out
toward the head of the bed.
• Unscrew the cap that is attached to the power cord and run cord down through the
hook.
• After the cord is through the hook, screw the cap together, this will hold the power cord
in place.