Product Manual

Owner's((Manual(|(REV(001( (
(
(
23(
BED FUNCTIONS
CRUSH HAZARD
Danger Crush hazard. Stay clear of this area during operation
Crush point exists due to LOW BED CLEARANCE. Do NOT place feet or other limbs under the
frame when lowering the bed. When lowering the bed, be aware this may cause INJURY if limbs
or personal items interfere with bed movement. Stay clear of the frame and ensure children or
pets are not under the bed before lowering the bed.
Hand Control Operation: 4 Function Hand Pendant
4 Function Hand Pendant
• Hand held pendant can be plugged into the left or right side of the bed frame for the
convenience of the resident.
• 1
st
Set of Buttons: Head deck up and down.
• 2
nd
Set of Buttons: Foot deck up and down.
• 3
rd
Set of Buttons: Auto Contour - raise & lower head & foot decks at the same time
• 4
th
Set of Buttons: Bed frame up and down.
• When the green light on the pendant is lit this indicates the pendant is in use.
PENDANT LOCATION
ELECTRICAL SHOCK HAZARD
Prior to working with any electrical parts, such as the 13-pin hand held pendant, motor/actuators
or control box, make sure the power to the bed frame is disconnected.
• To relocate the pendant to the other side of the bed, raise the bed to the highest
position then unplug the main power cord from wall outlet.
• At the opposite end of the Hand Pendant, lift up the locking bracket that holds the
pendant cable plug to the frame connection and unplug the pendant cord from the
frame connection.
• On the other side of the bed, lift up the cable locking bracket on the frame connection,
and line up the cable pins, then carefully push cable plug into the frame connection
and push cable locking bracket down around pendant cable plug.
• Plug in main power cord to wall outlet and test pendant functions.