Product Manual

Owner's((Manual(|(REV(001( (
(
(
15(
ASSEMBLY
WALL BUMPER INSTALLATION
The wall bumper is designed to prevent damage to facility walls by keeping the head end of the
bed spaced off the wall.
• Locate the wall bumper assembly over the two sets of holes in the top of the caster truck
closest to the center of the bed.
• Install the (4)1/4” bolts and washers as shown below, using the included Allen wrench.
• NOTE: If installing a trapeze the two sets of mounting holes farthest from the center of the
bed should be used.