Product Manual

10
Assembly Instructions Cont.
Method B
Installation of the motor from underneath the frame
B2. Attach the foot board and head board
as shown.
a. NOTE: The head section is higher than
the foot section. However, they are
interchangeable with each other, with all
other Drive and other manufacturers
head and foot boards.
B1. Install the casters by inserting the
stem of the caster into the leg
receptacle. It is recommended to
install 1 locking caster and 1 non-
locking caster on each bed end.
The locking casters should be
installed diagonally from each other.
Stem
Leg Receptacle
B3. Prior to installation, make sure that the 2 white motor blocks are in the retracted position.
CORRECT INCORRECT