Product Manual

1. Determine which side of the platform aachment will
be used.
2. Aach armrest and handle to vertical platform post
using the supplied bolts and adjustment.
3. Place both platform clamps on the vertical platform
post with the longer clamp on first (top).
4. Loosely aach the boom (smaller) clamp to the
lower horizontal walker crossbar.
5. Loosely aach the top (large) platform clamp to
either the upper horizontal walker crossbar or over the
top bar handle.
6. Adjust platform post to desired height.
7. Tighten both clamps carefully adjusting both sides of
clamps equally.
8. Adjust arm support and handle to increase patient
comfort and support. Tighten all adjustment knobs to
ensure patient safety.
A. Larger upper
bracket fits over the
handle of the walker.
B. Smaller boom
bracket is placed over the
boom cross brace of the
walker.
C. Tighten both brackets
securely when desired
height is achieved.
A
A
B C
instructions
Item # 10105-1 Shown