Declaration of conformity

EMC / CE Certification
The DC- Gear- Motors Types:
DSMP320 DSMP420 DSMP 521
Technical Data: DC 12V / 24 V
are EMC / CE certified.
Test Standards:
Emission: EN 61000-6-1: 2007
Emission: EN 61000-6-3: 2007 + A1: 2011
The above product has been tested with the listed standards and found in compliance
with the European Electromagnetic Compatibility Directive 2004/108/EC.
It is possible to use CE marking to demonstrate the compliance with his EMC Directive.
EN61000-6-1: Electromagnetic compatibility- Requirements for Information technology
equipment Radio disturbance characteristics- Limits and methods of measurement
EN61000-6-3: Electromagnetic compatibility Requirements for Information Technology
equipment – Immunity characteristics – Limits and methods of measurement.
The referred test report shows that the product complies with standards recognized
as giving presumption of compliance with the essential requirements in the above
listed EU Directive. Other relevant Directives have to be observed.
After preparation of the necessary technical documentation as well as the conformity
declaration, the CE marking as shown below can affixed on the equipment.
The statement is based on a single evaluation of the sample of above mentioned
products. It does not imply an assessment of the whole production.
Head Office:
Schlossstr. 32, D- 33824 Werther
Tel.: [phone] / 919202
Fax: [phone] / 5004
E-Mail: [e-mail]
Homepage:www.drive-system.com
Gerichtsstand:
Amtsgericht Gütersloh HRB8750
Geschäftsführer: Helmut Walter
Helmut Walter
Geschäftsleitung
Drive-System Europe Ltd. Date: April 26,2012