Datasheet

ManualsBrandsDRIVE-SYSTEM EUROPE ManualsDrive EngineeringLinear actuator 12 Vdc Stroke length 100 mm 1500 N DSZY4-12-30-100-IP65

Linear actuator DSZY4

Electric linear actuator

are used

in many different

applications.

DSZY4 Standard is equipped with a rugged acme screw

with high static force. It is a small, compact and lightweight

dc-linear drive.

Internal diodes allow the easy change of direction by

reversing the power-supply. All DSZY4-actuators have two

end-switches integrated ( not possible to adjust ).

An overload-protection can be made by using a current

control.

Type code

DSZY4

200

IP65

Type Voltage

12V

24V

Gear reduction

Stroke

100mm

150mm

200mm

250mm

300mm

Protection type

Diagram

load

–

speed

diagram

Load

–

current

diagram

Additional technical data

•

push/pull force up to 2.500N

• static force to 4.500N (by i=50)

• Operating temperature -26C°- 65C°

• Duty cycle 25%

•

Zinc alloy housing

• Aluminium outer tube and stroke rod

• Voltage 12 or 24 VDC

•

Options: hall sensors

• Protection type IP65

Summary of content (2 pages)

PAGE 1
Linear actuator DSZY4 Electric linear actuators are used in many different applications. DSZY4 Standard is equipped with a rugged acme screw with high static force. It is a small, compact and lightweight dc-linear drive. Internal diodes allow the easy change of direction by reversing the power-supply. All DSZY4-actuators have two end-switches integrated ( not possible to adjust ). An overload-protection can be made by using a current control.
PAGE 2
Dimension Length Linear actuator Stroke ± 2mm Mass in mm 100 150 200 250 300 A 205 255 305 355 405 B 305 405 505 605 705 DSZY4 - type standard x1: Standard = 10mm Optional = 8mm Accessories Front-Connector C1x - is standard Attention: by C3x heightens itself the dimension A or B about 41mm Mounting instruction Please make sure, that load is not bigger than shown in the diagram speed/load.