Datasheet

© Copyright by Drive-System Europe Ltd. Stand: 09.04.2015
Planetary gearmotor – technical data
Gear steps 1 2 3 4
Gear
reduction
5 14 19 27 35 51 71 100 139 189 264 516 721 939
Gear length
L in mm
20,6 27,0 33,4 39,8
12V
Rated torque
in Nm
0,03 0,08 0,10 0,14 0,19 0,23 0,33 0,46 0,65 0,73 1,00 1,20 1,20 1,20
Rated speed
in rpm
995 373 270 195 150 104 74 53 38 28 20 11.2 8.3 6.3
24V
Rated torque
in Nm
0,03 0,07 0,10 0,14 0,18 0,22 0,31 0,44 0,61 0,69 0,97 1,20 1,20 1,20
Rated speed
in rpm
990 370 265 191 150 103 74 53 38 28 20 11,2 8,3 6,3
Dimensions
Option encoder:
Magnetic encoders (hall sensors) are available as an option. They have two channels with 90º phase shift. The gearmotor’s
total length would thereby be increased by 13mm.
Additional technical data:
countable pulses per turn
(2 edges)
2 x 7 pulses
pin connections:
red : + motor
black : - motor
brown : encoder Vcc
green : encoder GND
blue : encoder A
purple : encoder B
Voltage
3,5 –
20VDC
Output current per
channel
5 mA
Drive-System Europe Ltd.
www.dc-getriebemotor.de
[e-mail]