Data Sheet

© Copyright by Drive-System Europe Ltd. Stand: 18.04.2018
Linear actuator DSZY35 – completely in stainless steel
Stainless steel linear electric cylinders are required in a wide variety of
applications. The electric cylinder DSZY35 is completely made of
stainless steel.
It is available in the version:
DSZY35-HS2
(with Hall sensor for incremental position feedback)
Equipped with a trapezoidal screw (ACME screw) it is small, compact and
lightweight DC linear actuator.
With the help of an integrated diode circuit, a fast reversal of direction is
achieved by simple voltage reversal of the DC motor.
The DSZY35 does not contain integrated limit switches.
An overload of the drive can be prevented by a separate monitoring and
limiting of the current.
Type code (all sizes can be combined)
DSZY35
-
12
-
10
-
200
-
HS2
-
IP69K
Typ
e
Voltage
12V
24V
Gear ratio
19
27
43
Stroke
50mm
100mm
150mm
200mm
250mm
300mm
350mm
400mm
signal feedback
HS2 (Hall-Sensor)
Pro
t
ection type
Standard: IP69K
Speed- and current-diagrams
Load
–
Speed
-
Diagram
Load
–
Current
-
Diagram
Additional technical data
•
push/pull force: up to 1.500N
• static force: 1.800N (bei i=43)
• Operating temperature: -20C°- 70C°
• Duty cycle: 10% (2min continuous
operation in 18min)
•
Housing is made of SUS304 stainless steel
• Outer tube and push rod made of stainless
steel SUS304
• Voltage: 12V und 24V
•
Protection for all types is IP69K
• Certificates: CE, EMC 2014/30/EU