Data Sheet

ManualsBrandsDrive System Europe by MSW ManualsAutomationLinear actuator DSZY30-12-A6-300-IP54 Stroke length 300 mm Thrust 1000 N 12 V DC 1 p

Linear actuator DSZY30

Electric linear actuators are used in different applications.

The electric actuator DSZY30 is a special version, where the motor is not

laterally but axially mounted to the piston rod.

Equipped with an acme screw (ACME screw), it is a small, compact and

lightweight DC linear drive.

Due to an integrated diode circuit, a rapid direction reversal is ensured by

simple voltage reversal of the DC motor.

It is standard, that all types have two integrated non-adjustable limit

switches, which are directly connected with the DC motor.

Overloading of the actuator can be avoided by separate monitoring and

limiting of the current with the motor control.

Type code (all options can be combined)

Optional

DSZY30

12 -

AC - 200 - IP54 -

A 6

Type Input

Voltage

12 Vdc

24 Vdc

Spindle

Stroke

50 mm

100 mm

150 mm

200 mm

250 mm

300 mm

IP Code

Front

connector

(piston rod)

1 = plastic slot

3 = standard

9 = spherical rod eye

A = metal slot

Rear

connector

(gear cover)

6 = Standard

Performance data: Load – Speed – Current

Spindle

Dynamic

load

(N)

Static

load

(N)

Typical speed *

(mm/s)

Typical current *

(A)

minimum

load

maximum

load

minimum load maximum load

12 Vdc

24 Vdc

12 Vdc

24 Vdc

AC 500 2,000 18.0 12.0 4.2 3.1 4.9 3.4

A8 800 3,000 13.0 8 4.2 3.1 5.2 3.6

A6 1,000 4,000 10 7 4.2 3.1 5.3 3.7

Load – Speed – Diagram * Load – Current – Diagram *

(*) Average values

Summary of content (3 pages)

PAGE 1
Linear actuator DSZY30 Electric linear actuators are used in different applications. The electric actuator DSZY30 is a special version, where the motor is not laterally but axially mounted to the piston rod. Equipped with an acme screw (ACME screw), it is a small, compact and lightweight DC linear drive. Due to an integrated diode circuit, a rapid direction reversal is ensured by simple voltage reversal of the DC motor.
PAGE 2
Additional technical specifications • push/pull load up to 1,000 N • Static load up to 4,000 N (by spindle type A6) • Noise level ≦ 65 dB • • • • • Duty cycle 10 % or 2 min continuous operation in 18 min • CE • EMC Directive 2014/30/EU and 2004/108/EC Aluminium outer tube and push rod Voltage 12 Vdc or 24 Vdc Operating temperature -26 C° - 65 C° IP Code IP54 Dimensions Front connector Type: 3 (standard) Type: 9 Type: 1 o.
PAGE 3
Front and rear connector Rear connector (gear cover) Front connector (piston rod) 3 = standard (metal) 1 = plastic slot D1=8 mm H=15 mm W2=6 mm D1=8 mm W1=22 mm 6 = spherical rod eye (metal) D1=8 mm A = metal slot 6 = standard (plastic) D1 = 8 mm H = 13,5 mm W1=22 mm W2=6 mm CAUTION: C36 is standard and will not be specified in the type code. If at least one connector is changed, option C must be attached to the type code (e.g.