Data Sheet

© MSW Motion Control GmbH Vertriebsgesellschaft Page 2 of 2
Additional technical specifications
• Thrust and tensile load up to 200 N
• Static load 400 N (by load 200 N)
• Working temperature -26 °C - 65 °C
• Operating voltage: 12 Vdc and 24 Vdc
• Duty cycle: 20 %
• Integrated, non-adjustable limit switches
• IP Code IP54 for all models
Dimensions
Dimensions (length) in mm
Stroke (S) 50 100 200 300 500
(L) retracted 285 335 435 535 735
extended 335 435 635 835 1,235
Red wire on “-” and black wire on “+”:
Actuator extends.
Black wire on “-” and red wire on “+”:
Actuator retracts.
Cable length: 900 mm
Weight
Stroke
50
100
200
30
0
500
Weight
in kg
1.52
1
.
70
2.00
2
.
30
2
.
85
Installation instructions
It must be ensured that the load is not greater than shown in the diagram. To protect against overload, the voltage must be switched off when
the maximum rated current is reached. This can be read in the load-current diagram depending on the selected reduction ratio. Please note
the correct supply voltage, which is indicated on the electric linear actuator.
The piston rod extends when the red wire is connected to positive and the black wire to negative. For the retraction of the piston rod, positive
must be reversed with negative. The movement always stops automatically when the built-in limit switches are reached or when the voltage is
interrupted. The limit switches cannot be changed by the customer.
The load must always be centered in the direction of movement. Transverse forces must be avoided. They shorten the service life and can
impede the function or lead to irreparable damage in extreme cases.
CAUTION: The limit switches have no on/off function for the linear actuator. Therefore, the voltage must be immediately disconnected after
the limit switches have been triggered, or the piston must be moved out of the end position in a timely manner
Drive System Europe by MSW
®
A trade mark of MSW Motion Control GmbH
MSW Motion Control GmbH
Vertriebsgesellschaft
Schloßstr. 32/34, 33824 Werther (Westf.)
Germany
[e-mail]
www.msw-motion.de
Tel.: [phone]
Errors and technical changes excepted. Version: 15 January 2022