Instruction manual

3. Installation

3.1 Unpacking

To secure its contents inside, the device and accessories are bundled in a paper packaged box.

Unpack this box by removing the device and its accessory and checking for any damage, which may

have occurred during shipping. If there are damages, please contact your dealer immediately.

3.2 Setting Up

1) Place the device on a flat surface and at a lower

level than your sleeping position.

2) Connect the power cord to the device and plug

into main electrical outlet. Turn on the device

by pressing the ON/OFF switch on the left side

of the device

Once the device is turned on, it is in ready to

operate position (“STANDBY” sign appears in

LCD display)

NOTE: The plug is also served to

disconnect the device.

3) Connect one end of the air tubing firmly to the

air outlet on the back of the device. As shown

in the left figure.