Instruction manual

Water Chamber: The water chamber contains the water for humidification. Its removable
base plate allows itself ease for cleaning.
Fill Line: Symbol indicates the maximum level of water that water chamber can
contain.
Baffler: The baffler can prevent water spillage due to improper shaking.
Heater Plate: Warms the water in the water chamber.
Heater Plate Switch: When the switch is pressed against the water chamber, the heater plate will
start to work.
Control Knob: This control knob, graduated from 1 to 6, is used to adjust the heating
temperature of the heater plate from 30°C to 60°C.
Power On Indicator
(Green LED):
When lit, this indicates the humidifier is turned on and ready for operation.
Heater On Indicator
(Yellow LED):
When lit, this indicates the heater is turned on.
Inlet Port with Silicon
Connector:
Connect to the outlet port of the CPAP device.
Outlet port: Connect the flexible tubing here.
Water Chamber Slider: Lock and unlock the water chamber
Outlet Port
Power ON
Indicator
Heater ON
Indicator
Control Knob
Power Socket
Water Chamber
S
li
de
r
Fill Line
Removable
Base
Heater Plate
Heater Plate
Switch
Inlet Port
Baffler
(Inside Water Chamber)
5