User Manual

11
Assembly Instructions Cont.
Method B Continued
B4. With the motor orientated properly
with the bed (head to head, foot to
foot), align the motor with actuator bar
and lift the head spring to the highest
position. The motor will automatically
be pulled towards the bed and lock
onto the actuator. Once the head
side of the motor is attached to the
head section of the bed, return the
head section to the at position. Once
at, attach motor cover to the head
section of the motor. Repeat for foot
section.
Note: Be sure the head section is
attached rst.
Actuator Bar
End Method B