Owner's Manual

Titan Owner’s Manual www.drivemedical.com
16
Your power wheelchair requires assembly prior to initial use. Please be sure to follow
these steps to properly set up your power wheelchair.
Step 1:
Loosen and remove the two shroud
knobs by hand that secures the shroud to
the base of the power wheelchair.
Lift up on the shroud to remove.
Step 2:
Connect both battery connectors to the
main cable.
The battery connectors are red and
black, and should connect to the
matching color harness from the main
cable.
Step 3:
Reinstall the power wheelchair’s shroud
by placing on top of the power
wheelchair base, and reinstall the two
shroud knobs removed in Step 1.
VI. ASSEMBLY