Technical Specifications

M A T E R I A L S A F E T Y D A T A S H E E T
Page: 1
SW-1 STORAGE AREA: WAREHOUSE
4/24/2012
HMIS CODES: H F
R
PRODUCT CODE: SW-1 Solid Wood/Bamboo Floor Repair Kit 2 1 0
================== SECTION I - MANUFACTURER IDENTIFICATION =================
M
ANUFACTURER'S NAME: DriTac Flooring Products, LLC
A
DDRESS : 60 Webro Roa
d
Clifton, NJ 07012
EMERGENCY PHONE : [phone] E
F
FECTIVE DATE : 04/26/10
INFORMATION PHONE : [phone]
========== SECTION II - HAZARDOUS INGREDIENTS/SARA III INFORMATION =========
VAPOR PRESSURE WEIGHT
REPORTABLE COMPONENTS CAS NUMBER MM HG @ TEMP PERCENT
-------------------------------------------------------------------------------------------------------------------------------
* POLYMERIC DIPHENYLMETHANE DIISOCYANATE 9016
-
8
7
-
9
<0.00001 77 F 31 - 40%
THIS PRODUCT CONTAINS 45% 4,4'-DIPHENYLMETHANE DIISOCYANATE (MDI)
CAS 101-68-8 WHICH IS SARA 313 REPORTABLE - OSHA: .020 PPM CEILING
.020 MG/M3 CEILING
ACGIH: .005 PPM TWA
.051 MG/M3 TWA
* Indicates toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.
IF THIS PRODUCT CONTAINS PARTICULATES (FILLERS), THEY ARE BLENDED
I
NTO A LIQUID AND POSE NO HAZARD
AS SUPPLIED. THEY MAY HOWEVER BE RELEASED IF FINAL PRODUCT IS MACHINED, I.E. SANDED, CUT, ETC.
THESE INGREDIENTS ARE LISTED BELOW.
NONE
INFORMATION CONCERNING ITEMS LISTED AS PROPRIETARY WILL BE DISPENSED TO H
E
ALTH AND SAFETY PROFESSIONALS AS REQUIRED BY
29CFR 1910.1200 (OSHA HAZARD COMMUNICATIONS STANDARD).
TSCA INVENTORY STATUS: ALL COMPONENTS OF THIS PRODUCT ARE LISTED ON THE TSCA INVENTORY.
=============== SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS ============
BOILING RANGE: NOT DETERMINED. SPECIFIC GRAVITY (H2O=1): 1.0566
V
APOR DENSITY: NOT DETERMINED. EVAPORATION RATE: NOT DETERMINED.
COATING V.O.C.: 0.0024 lb/gl MATERIAL V.O.C.: 0.0024 lb/gl
SOLUBILITY IN WATER: NOT DETERMINED.
A
PPEARANCE AND ODOR: REFER TO PRODUCT BULLETIN.
================= SECTION IV - FIRE AND EXPLOSION HAZARD DATA ==============
FLASH POINT: 390 F METHOD USED: PMCC
FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: N/A UPP
E
R: N/A