Technical Specifications

M A T E R I A L S A F E T Y D A T A S H E E T

RS-1 REPAIR KIT Page:

8/24/2012

PRODUCT NAME: RS-1 REPAIR KIT HMIS CODES: H F R P

PRODUCT CODE: .4677-3M 1 0 0 B

================== SECTION I - MANUFACTURER IDENTIFICATION =================

MANUFACTURER'S NAME: DriTac Flooring Products, LLC

ADDRESS : 60 Webro Road

Clifton NJ 07012

EMERGENCY PHONE : 1-800-535-5053 DATE PRINTED : 8/24/2012

INFORMATION PHONE : 1-973-614-9000 NAME OF PREPARER : R&D LAB

========== SECTION II - HAZARDOUS INGREDIENTS/SARA III INFORMATION =========

VAPOR PRESSURE WEIGHT

REPORTABLE COMPONENTS CAS NUMBER mm Hg @ TEMP PERCENT

------------------------------------------------------------------------------------------------------------------------

*** NO REPORTABLE QUANTITIES OF HAZARDOUS INGREDIENTS ARE PRESENT ***

*** No toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372 are

present. ***

=============== SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS ============

BOILING RANGE: 212 DF SPECIFIC GRAVITY (H2O=1): 1.03

VAPOR DENSITY: LIGHTER THAN AIR EVAPORATION RATE: SLOWER THAN N-BUTYL

ACETATE

COATING V.O.C.: 0.0 lb/gl MATERIAL V.O.C.: 0.0 lb/gl

SOLUBILITY IN WATER: DISPERSIBLE

APPEARANCE AND ODOR: WHITE MILKY LIQUID/MILD ODOR

================= SECTION IV - FIRE AND EXPLOSION HAZARD DATA ==============

FLASH POINT: NONE METHOD USED: N/A

FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: n/a UPPER: n/a

EXTINGUISHING MEDIA: FOAM, CO2, DRY CHEMICAL, WATER FOG, OTHER

SPECIAL FIREFIGHTING PROCEDURES

WHEN DRIED POLYMER BURNS, WATER (H20), CARBON DIOXIDE (CO2), CARBON MONOXIDE (CO) AND SMOKE ARE PRODUCED. PYROLYSIS

PRODUCTS MAY INCLUDE SOME HAZARDOUS MATERIAL. WEAR SELF-CONTAINED BREATHING APPARATUS AND PROTECTIVE CLOTHING.

UNUSUAL FIRE AND EXPLOSION HAZARDS

THERE ARE NO UNUSUAL FIRE OR EXPLOSION HAZARDS

======================== SECTION V - REACTIVITY DATA =======================

STABILITY: STABLE

CONDITIONS TO AVOID

AVOID CONDITIONS WHERE CONTAMINATION WITH STRONG OXIDIZING AGENTS OR WATER SENSITIVE MATERIALS MAY OCCUR. SEE BELOW.

INCOMPATIBILITY (MATERIALS TO AVOID)

REACTS WITH STRONG OXIDIZING AGENTS AND ANY WATER SENSITIVE MATERIAL. EXERCISE CAUTION. READ MSDS POSTER GUIDE.

PAGE 1
M A T E R I A L S A F E T Y D A T A S H E E T RS-1 REPAIR KIT Page: 8/24/2012 PRODUCT NAME: RS-1 REPAIR KIT PRODUCT CODE: .
PAGE 2
M A T E R I A L S A F E T Y D A T A S H E E T RS-1 REPAIR KIT Page: 8/24/2012 HAZARDOUS DECOMPOSITION OR BYPRODUCTS MAY PRODUCE FUMES CONTAINING CARBON DIOXIDE (CO2), CARBON MONOXIDE (CO), OXIDES OF NITROGEN WHEN HEATED TO DECOMPOSITION HAZARDOUS POLYMERIZATION: WILL NOT OCCUR ==================== SECTION VI - N/A HEALTH HAZARD DATA ======================= INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE IF INHALED, VAPORS MAY CAUSE RESPIRATORY IRRITATION, NAUSEA, HEADACHE.
PAGE 3
M A T E R I A L S A F E T Y D A T A S H E E T RS-1 REPAIR KIT Page: 8/24/2012 KEEP CLOSURE TIGHT AND CONTAINER UPRIGHT TO PREVENT LEAKAGE. TEMPERATURES NOT BELOW 50 DF. KEEP FROM FREEZING. ===================== SECTION VIII - STORE ONLY IN WELL VENTILATED AREAS INDOORS AT CONTROL MEASURES ====================== RESPIRATORY PROTECTION NONE REQUIRED VENTILATION EFFECTIVE EXHAUST VENTILATION SHOULD ALWAYS BE PROVIDED TO DRAW MISTS, FUMES AND VAPORS AWAY FROM WORKERS TO PREVENT ROUTINE INHALATION.