Specifications

3
VAPORMIST
®
HUMIDIFIER OVERVIEW
Deionized water models (VAPORMIST DI)
The VAPORMIST DI, shown here, is specifically
designed for use with deionized or reverse osmosis
water.
Standard water models (VAPORMIST)
The standard water VAPORMIST unit requires
water conductivity of at least 100 µS/cm
(2 grains/gallon) to operate. It will not
operate with water treated
by reverse osmosis or
deionization processes
(see DI water model
below).
OM-82-4
Removable
evaporating
chamber
Slide assembly under evaporating chamber
provides easy removal for cleaning
INCOLOY alloy-sheathed
immersion heaters
Keyholes for
wall mounting
Water fill ¼" NPT (female)
1½" (DN40) or 2" (DN50) flexible
vapor hose, pipe or tubing connects
to dispersion tube(s) or to an SDU
Condensate
return line
Duct
Electrical area
Electrical conduit
knockouts
¾" NPT (DN20)
coupling, skimmer port
and overflow drain
Water fill access hole
Removable
evaporating
chamber
Condensate
return line
INCOLOY alloy-sheathed
immersion heaters
Duct
Electrical area
Electrical
conduit
knockouts
Slide assembly under
evaporating chamber provides
easy removal for cleaning
Water fill access hole
Keyholes for
wall mounting
Water fill ¼" NPT (female)
Float cutoff switch
OM-82-5
Ball valve
¾" NPT (DN20) coupling,
skimmer port and overflow drain
1½" (DN40) or 2" (DN50) flexible
vapor hose, pipe or tubing connects
to dispersion tube(s) or to an SDU
VM99-C-0302.pdf 3 11/19/2009 9:51:30 AM