Installation guide

DRI-STEEM GTS Humidifier Installation, Operation, and Maintenance Manual Page 57
Dispersion
Ultra-sorb
Rapid-sorb
Single tube
Single tube with drain
Area-type fan
Condensate/drain piping
Water seal height of dispersion system
______________________________
Air gap
Condensate return to tank
Drane-kooler
Cold-start burner ignition
Burner 1 lights after: First try
Second try
Third try
Burner 1 color after 15 minutes:
Blue
Orange
Red-orange
Burner 2 lights after: First try
Second try
Third try
Burner 2 color after 15 minutes:
Blue
Orange
Red-orange
Burner 3 lights after: First try
Second try
Third try
Burner 3 color after 15 minutes:
Blue
Orange
Red-orange
Burner 4 lights after: First try
Second try
Third try
Burner 4 color after 15 minutes:
Blue
Orange
Red-orange
Safety testing to verify function
Low water test ______________________________
High humidity limit test _______________________
Airflow test ________________________________
Aquastat test _______________________________
Additional comments
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
O p e r a t i o n : S t a r t - u p c o m m i s s i o n i n g
c h e c k l i s t ( c o n t i n u e d )
Operation