Specifications

3
HUMIDI-TECH
®
HUMIDIFIER
Figure 3-2: HUMIDI-TECH DI humidifier
(deionized water)
The HUMIDI-TECH DI humidifier,
shown here, is specifically designed
for use with deionized or reverse
osmosis water.
Figure 3-1: HUMIDI-TECH humidifier
The standard HUMIDI-TECH unit requires
water conductivity of at least
100 µS/cm to operate. It will not
operate with water treated
by reverse osmosis or
deionization processes.
(See DI model below.)
OM-82-4
Removable
evaporating
chamber
Slide assembly under evaporating chamber
provides easy removal for cleaning
INCOLOY alloy-sheathed
immersion heaters
Removable
evaporating
chamber
Keyholes for
wall mounting
Water fill DN8 (¼")
(female)
DN40 or DN50 flexible
vapor hose connects to
dispersion tube in duct
Condensate
return line
Duct
Electrical side
Electrical
connections
DN20 (¾") coupling,
skimmer port and
overflow drain
Water fill access hole
Condensate
return line
INCOLOY alloy-sheathed
immersion heaters
Duct
Electrical side
Electrical
connection
DN40 or DN50 flexible
vapor hose connects to
dispersion tube in duct.
Slide assembly under
evaporating chamber provides
easy removal for cleaning.
Water fill access hole
Keyholes for
wall mounting
Water fill DN8 (¼")
(female)
Float cutoff switch
OM-82-5
Ball valve
DN20 (¾") coupling,
skimmer port and
overflow drain
VM99-C-0400-M-0801.pdf 3 11/19/2009 9:51:53 AM