Specifications

21
REPLACEMENT PARTS
Table 21-1: HUMIDI-TECH
®
replacement parts (refer to the drawing on previous page)
* Specify humidifier model and serial numbers when ordering.
No. Description Qty. Part No.
1 Head bolt, large Phillips, ¼ - 20 X 1" 4 700300-013
2 Thermo cut-out 1 409560-001
3 Cover, heater terminal 1 *
4 Hose clamp, 2" 2 700560-200
5 Hose cuff, 1½" 1 305390-006
5 Hose cuff, 2" 1 305391-006
6 Cover, tank 1 *
7 Heater element * *
8 Probe assembly with cord and plug 1 406050-005
9 Probe assembly gasket 1 309750-004
10 Probe assembly, VM 2-4 1 406270
10 Probe assembly, VM 6-34 1 406275
11 Valve, ¾" electric, 24V 1 505400-001
11 Valve, ½" SST ball 1 505000-003
11
Drain, ¼" NPT E.O.S., 24V solenoid
SST w/DIN plug (not shown)
1 505086-003
12 Tank weldment 1 *
13 Valve, ¼" solenoid, 24V w/DIN plug 1 505084-001
14 Cabinet enclosure 1 330002-001
15 Hose, ¾" ID 1 307020-002
16 Hose clamp, ¾" 4 700560-075
17 Nut assembly, ¼-20, VM/VMDI 2-4 4 700650
17 Nut assembly, ¼-20, VM/VMDI 6-34 2 700650
18 Cover, tank gasket 1 *
No. Description Qty. Part No.
19 Washer, #8 external tooth, pltd 2 700200-003
20 Nut, #8-32 hex, pltd 6 700200-002
21 Cover, subpanel 1 120277
22 Fill adapter, VM 2-4 1 160226-041
22 Fill adapter, VM 6-16 1 160224-041
22 Fill adapter, VM 21-34 1 160224-052
23 Panel, insulation 1 309845-003
24 Sensor, temperature 1 405760
25 Screw, Phillips head, #8-32 X ½" 8 700170-007
26 Frame assembly, chassis 1 165541
27 Clip, wire harness 1 405892-001
28 Clip, temperature sensor 1 408251
29 Valve assembly, float 1 505310
30 Switch, float, 1/8" NPT 1 408420-002
31 Gasket, 2.50 OD X 1.90 ID 1 309750-004
32 Ring, seal, ¼"-18 NPT 1 306365
33 Gasket, bulkhead, 1.60 OD X 1.15 ID 1 309750-005
34 Probe housing, nylon, VM 1 308500
35 Nut, VM heater .475 1 409601-001
35 Nut, VM heater .375 1 409602-001
36 Gasket, VM heater .475 1 409601-002
36 Gasket, VM heater .375 1 409602-002
37 Cap, Black 4 409593-002
VM99-C-0400-M-0801.pdf 21 11/19/2009 9:51:55 AM