Specifications

22
HUMIDI-TECH
®
REPLACEMENT PARTS
HUMIDI-TECH
®
replacement parts (refer to the drawing on previous page)
* Specify humidifier model and serial numbers
when ordering.
No. Description Qty. Part No.
1
Head bolt, large Phillips,
¼ - 20 X 1"
4 700300-013
2 Thermo cut-out 1 409560-001
3 Cover, heater terminal 1 *
4 Hose clamp, 2" 2 700560-200
5
Hose cuff, 1½" 1 305390- *
Hose cuff, 2" 1 305391- *
6 Cover, tank 1 *
7 Heater element * *
8
Probe assembly with cord
and plug
1 406050-100
9
Gasket, 2.50" OD x
1.90" ID
1 309750-004
10
Probe assembly, HT-4 1 406270
Probe assembly, HT 6-34 1 406275
11
Valve, ¾" electric, 24V 1 505400-001
Valve, ½" SST ball 1 505000-003
12 Tank weldment 1 *
13
Valve, ¼" solenoid, 24V
w/DIN plug
1 505084-001
14 Cabinet enclosure 1 330001-001
15 Hose, ¾" ID 2 307020-002
16 Hose clamp, ¾" 4 700560-075
17
Nut assembly, ¼-20, HT-4 4 700650
Nut assembly, ¼-20,
HT 6-34
2 700650
18 Cover, tank gasket 1 *
No. Description Qty. Part No.
19
Washer, No. 8 external
tooth, pltd
2 700200-003
20 Nut, 8-32 hex, pltd 6 700200-002
21 Cover, subpanel 1 120277
22
Fill adapter, HT-4 1 160226-041
Fill adapter, HT 6-16 1 160224-041
Fill adapter, HT 21-34 1 160224-052
23 Panel, insulation 1 309845-003
24 Sensor, temperature 1 405760
25
Screw, Phillips head, 8-32
x ½"
8 700170-007
26 Frame assembly, chassis 1 165541
27 Clip, wire harness 1 405892-001
28 Clip, temperature sensor 1 408251
29 Valve assembly, float 1 505310
30 Switch, float, 1/8" NPT 1 408420-002
31 Ring, seal, ¼"-18 NPT 1 306365
32
Gasket, bulkhead, 1.60
OD X 1.15 ID
1 309750-005
33 Probe housing, nylon, HT 1 308500
34 Nut, HT heater .475 1 409601-001
35 O-ring, 5/8" EPDM No. 016 1 300400-009
36 Cap, black 4 409593-002
37
DI orifice, HT 4-16 1 160229-041
DI orifice, HT 21-34 1 160229-052
38 Adapter, 1/4" to 3/8" 1 167121
39 Adapter, 1/4" to 3/8" 1 250405-004
40 Bulkhead nut 1 162721-002
41
Tube weld, low water,
short, HT-4
1 167787
Tube weld, low water, long,
HT 6-34
1 167788
HT(HT)_IOM_Metric.pdf 22 1/18/2010 1:42:05 PM