Installation guide

1BHFt%3*45&&.7BQPSMPHJD 3 Installation and Operation Manual
Figure 46-1:
Multi-tank status screen
5BOLOBNF"
other readouts are 1, B through P
1SJPSJUZHSPVQOVNCFS
other readouts are 1, 2, or 3
5ZQFPGUBOL.BTUFSPUIFS
readouts are SLAVE and -no comm-
Go back to the Main Menu
Make the current tank
the display host
Go to the next tank in
the multi-tank group
Total system demand is 121 lbs/hr
Current demand for this
tank is 20 lbs/hr
Current total output is 120 lbs/hr
Current total output is 27% of system capacity
Tank is producing 20 lbs/hr
5BOLTUBUVT
Steaming; other
readouts are
warm, preheating,
cold, draining,
off-line
Tank output is
20% of its capacity
Multiple tank configurations:
Multi-tank status screen
Important:
Information on this page applies to
Vapor-logic
3 firmware versions 5.x.x
and 7.x.x only (systems with multi-tank
capability).
VL3_IOM.pdf 50 11/19/2009 9:11:14 AM