Installation guide

1BHFt%3*45&&.7BQPSMPHJD 3 Installation and Operation Manual
Table 38-1:
LonTalk network variable inputs (nvi) available with Vapor-logic
3
nvi SNVT Description
nviTimeStamp 4/75@UJNF@TUBNQ Set the date and time of day.
nviMode 4/75@DPVOU 4FUUIFNPEFPSDVSSFOUTUBUVTPGUIFIVNJEJmFS5IFEFmOFEPQUJPOTBSF
1. Auto
2. Standby
3. Drain (manual)
OWJ4QBDF@41 4/75@MFW@QFSDFOU Set the humidity set point for the space being humidified.
OWJ%VDU@41 4/75@MFW@QFSDFOU Set the duct high limit set point for VAV option.
nviSetOutputPcnt 4/75@MFW@QFSDFOU Set the steam output as a percentage of the humidifier’s total capacity.
OWJ4FU4UFBN-C@)S 4/75@DPVOU Set the steam output in pounds per hour. If the request exceeds the unit's capacity, the unit will run at 100%
capacity.
Table 38-2:
LonTalk network configuration inputs (nci) available with Vapor-logic
3
nci SNVT Description
nciGlassTempOfst 4/75@UFNQ@EJGG@Q The temperature added to the measured window glass temperature (for sensor calibration). Whether the
VOJUTBSFFOUFSFEJO'PS$XJMMEFQFOEPOUIFMPDBMJ[BUJPOPGUIF/FUXPSL.BOBHFS
nciRHRoomOffset 4/75@MFW@QFSDFOU The amount (percent) added to the measured room (or space) RH (for calibration).
nciRHDuctOffset 4/75@MFW@QFSDFOU The amount (percent) added to the measured duct RH (for calibration).
ODJ1*%@#BOE 4/75@MFW@QFSDFOU Allows network access to the PID band. See Pages 66-69 for more details about this value.
ODJ1*%@,1 4/75@DPVOU Allows network access to the PID P gain. See Pages 66-69 for more details about this value.
ODJ1*%@,* 4/75@DPVOU This allows network access to the PID I gain. See Pages 66-69 for more details about this value.
ODJ1*%@,% 4/75@DPVOU This allows network access to the PID D gain. See Pages 66-69 for more details about this value.
-PO5BML/FUXPSLWBSJBCMFBOE
DPOGJHVSBUJPOJOQVUTOWJBOEODJ
VL3_IOM.pdf 42 11/19/2009 9:11:14 AM