Specifications

17
STEAM SUPPLY CONNECTION METHODS
OM-743
Vapor hose. See table 18-2 for sizing. (Pitch back min. 2" per foot to humidifier with supports
to prevent sagging.) Maximum length 10'. Humidifier must be mounted level.
Stainless steel dispersion tube in middle of duct. Pitch as shown
in figure 18-1. Typically, GTS
®
requires multiple
dispersion tubes. See table 18-2 on page 18 for
capacities.
OM-733
Figure 17-2: Steam Supply Using Pipe or Tubing
(Flange option available)
Pipe Insulation Recommended
Figure 17-1: Steam Supply Using Vapor Hose
GTS-IOM-1298.pdf 17 11/17/2009 3:57:04 PM