Installation guide

Page 58 • DRI-STEEM GTS Humidifier Installation, Operation, and Maintenance Manual
Dispersion
☐ Ultra-sorb
☐ Rapid-sorb
☐ Single tube
☐ Single tube with drain
☐ Area-type fan
Condensate/drain piping
Water seal height of dispersion system
______________________________
☐ Air gap
☐ Condensate return to tank
☐ Drane-kooler
Cold-start burner ignition
Burner 1 lights after: ☐ First try
☐ Second try
☐ Third try
Burner 1 color after 15 minutes:
☐ Blue
☐ Orange
☐ Red-orange
Burner 2 lights after: ☐ First try
☐ Second try
☐ Third try
Burner 2 color after 15 minutes:
☐ Blue
☐ Orange
☐ Red-orange
Burner 3 lights after: ☐ First try
☐ Second try
☐ Third try
Burner 3 color after 15 minutes:
☐ Blue
☐ Orange
☐ Red-orange
Burner 4 lights after: ☐ First try
☐ Second try
☐ Third try
Burner 4 color after 15 minutes:
☐ Blue
☐ Orange
☐ Red-orange
Safety testing to verify function
Low water test ______________________________
High humidity limit test _______________________
Airflow test ________________________________
Aquastat test _______________________________
Additional comments
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
____________________________________________
Start-up commissioning checklist
Operation