Use and Care Manual

Drinkpod LLC 888 852 7873

www.drinkpod.com

Installing The ConstantBrew Water Line

Step #4 – Connecting Assembly 1 to ice maker.

Now we want to hook up Connect Point (C1) on Assembly 1 to your ice maker (water line).

If your hose is threaded (1/4 in. O.D. compression):

Screw it onto Connect Point (D) on Assembly 2 (included with your kit. If it’s not threaded, skip

this part.

Step #4 (continued)

Now insert the tubing of your ice maker hose or (if it is threaded) Connect Point (C2) on

Assembly 2 to Connect Point (C1) on the Assembly 1.

Assembly 2

Connect Point (C2)

Connect Point (D)

Assembly 1

Connect Point (C1)

Connect Point (C2)

Assembly 2

Connect Point (D)

Step #5 – Confirm Assembly 1 shutoff valve is closed.

Before we open your ice maker water source shutoff valve, we want to make sure that the valve

on your Assembly 1 is closed so water doesn’t spray everywhere. The handle should be twisted

so that it is perpendicular to the ports at either end.

Step #6 – Open ice maker water source shutoff

valve.

Now you can re-open (turn back on) the valve on your

ice maker box (water source).