Use and Care Manual

WWW.DRINKPOD.COM

BEFORE FIRST USE

Take the device carefully out of its packaging. Remove all the packaging material. Keep

children and animals away from packaging materials. There is danger of suffocation! Clean

the chute, dispenser, grinder, and plunger before it comes into contact with any food (refer

to the CLEANING section).

INSERTING

REMOVING

1. Put and lock the tray on chute top properly.

Insert the grinder into the chute. Be sure the

gasket is properly placed inside the dispenser.

Then affix the dispenser to the chute by

placing on the front and turning

counterclockwise to lock.

2. Insert the tip of the grinder into the

housing. Turn counterclockwise to lock the

chute assembly in place.

3. Insert the plunger into the chute.

1. Switch off and unplug the device, then

take out the plunger from the chute.

2. Remove the chute assembly by turning

clockwise from the housing.

3. Remove dispenser from chute assembly

by turning clockwise. Then take out the

grinder from the chute and remove the tray

from chute top.