Use and Care Manual
Installing Your Drinkpod
Installing Your Drinkpod 2-24
Diagram 2.7.3 Connect Tubing To Shuto Valve
5. Make sure the valve handle is closed by turning it clockwise as far as it will go. When
closed, the handle extends out perpendicularly to the length of the shuto valve.
Diagram 2.7.4 Ensure Valve Is Closed
6. Turn on the water at your Water Source (see following diagrams). Conrm there are no
leaks at any of your connections. If there are, turn o the water, reconnect correctly, and
then turn water back on.