Use and Care Manual
Installing Your Drinkpod
Installing Your Drinkpod 2-9
Diagram 2.3(B).6 Attach Sink Adapter Valve To Cold Water Shuto Valve
7. Now using your hand, screw the (female) end of
KS-G
Cold Water Feed Line onto
the top (male) end of
F
3/8 in. Sink Adapter Valve, and use wrench to tighten
using medium force.
Diagram 2.3(B).7 Attach Cold Water Feed Line To Sink Adapter Valve
8. Let’s conrm there are no leaks. Check to make sure the valve on part
F
3/8 in. Sink Adapter Valve is closed (pointing downward as shown above). Next,
open the ow on
KS-F
Cold Water Shuto Valve by repeating “Step 4” on page