User's Manual

PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
SKU 92383 For technical questions, please call 1-800-444-3353 PAGE 2
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 11
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
Item Description
Electrical Requirements Power Source: 18 VDC Rechargeable Battery.
Battery Type: NI-MH 1300 MAH, 15 Cell, 1.2V.
Initial Charge Time: 5 Hours.
Subsequent Charge Times: 3 Hours.
Charger Input: 120 VAC / 60 Hz.
Charger Output: 24 VDC / 400 MA.
Motor: 0-900 RPM No Load / Reversible.
Chuck Type 3/8” Keyless.
Accessories 2” Double End Bits (Qty. 2).
AC/DC Charger/Base.
Weight 4.60 Pounds.