Operating instructions

DrillMaster Console Functions
The DrillMaster features a large, easy-to-read liquid crystal display, easy-to-use rotary dial and lighted panel
for night use.
SECTION ON/OFF:
The Console has three
Section ON/Off toggle
switches on top of the
console. The toggle
switches turn drill sections
on and off directly and
also signal the Console
which sections are on or
off.
WEIGHT TOTALS (1) (2)
(3): Displays total product
lbs. applied. May be reset
(Note: WEIGHT and
AREA counters work in
pairs, if WEIGHT counter
1 is reset, it also resets AREA counter 1).
WEIGHT/MINUTE: Displays lbs. of product
dispensed per minute.
AREA/HOUR: Displays calculated Acres/Hour.
RATE: Displays application rate in lbs./acre.
AREA TOTALS (1) (2) (3):
Keeps a running count of the
total acres worked. May be
reset. (Note: WEIGHT and
AREA counters work in pairs,
if WEIGHT counter 1 is reset,
it also resets AREA counter 1).
DISTANCE: Displays distance
traveled in feet. May be reset.
METER RPM: Displays
Seed Drive Shaft RPM.
SPEED: Displays ground
speed in miles per hour.
WARNING LIGHT: Indicates over
or under application of 10% of
the Target Rate in AUTO or Loss
of Sensor Signal in Man. Also lit
when in CAL.
CrustBuster
DrillMaster Quick Start Guide
346-001150 Pg 7 Revised 11/2010