Operating instructions

CrustBuster
DrillMaster Quick Start Guide
346-001150 Pg 29 Revised 11/2010
Determining Hydraulic Motor Rotation
Motor rotation must turn the seed shaft of the drill counter-clockwise when viewed from
the left end of the drill.
Motor rotation is determined by looking into the shaft end of the motor.
For counter-clockwise rotation oil should ow into port marked 2, out port 1, into the next
motor in the series or back to the bypass port tee tting on the PWM valve.
The ON-OFF solenoid valve must be mounted in the cavity next to the in port.
Reverse ports and solenoid valve for clock-wise rotation.
PHOTO SHOWS MOTOR CONFIGURED FOR COUNTER-CLOCKWISE ROTATION