Operating instructions
26
The AREA, DISTANCE and WEIGHT totals counters maintain
a running count during operation regardless of the position
of the rotary switch. When any of these counters reach
their maximum capacity, or when you want to start a new
count, the value may be reset to zero by performing the
following routine. Counters may be reset independently of
each other.
Turn the sections 1. OFF or put the system in HOLD.
Turn the rotary switch to the counter to be reset.2.
To reset distance turn the rotary switch to 3. DISTANCE
and simply press and hold the RESET button until the
display reads zero. The display will show the word
LAr during this process, and will show 0.0 when reset
to zero is complete.
To reset the weight and area counters; there are three 4.
independent AREA counters, paired with three WEIGHT
counters. The active pair of counters is indicated by the
small numbers in the lower right area of the display (1,2,
or 3) when the rotary switch is in the AREA or WEIGHT
TOTALS position. Select the pair of counters you want
to use by pressing the “+” button. The small number
will increment each time the “+” button is pressed
(from 1 to 3, then rolls back to 1). DO NOT attempt
to select the counter number by using the “-” button,
because that will clear the active pair of counters if held
for 1 second. If the “-” button is accidentally pressed,
the console will display LAr to alert the user that the
counters will be cleared. If the user continues to hold
the “-” button for 1 second LAr will disappear and
be replaced by 0.0, indicating that the selected pair of
counters has been cleared.
Operation (cont)
Resetting System Counters
METER
CAL
ROW
SPACING
ADJUST
RATE
TARGET
RATE
WEIGHT TOTALS
(1) (2) (3)
SPEED
RATE
AREA TOTALS
(1) (2) (3)
DISTANCE
METER
RPM
ROWS/
SECTION
CAL
TEST
TEST
SPEED
SPEED
CAL
WEIGHT /
MINUTE
AREA/
HOUR
AUTO
MAN
CAL
RESET
MANAUTO
CALHOLD
V 1 2 3 4
DrillMaster
METER
CAL
ROW
SPACING
ADJUST
RATE
TARGET
RATE
WEIGHT TOTALS
(1) (2) (3)
SPEED
RATE
AREA TOTALS
(1) (2) (3)
DISTANCE
METER
RPM
ROWS/
SECTION
CAL
TEST
TEST
SPEED
SPEED
CAL
WEIGHT /
MINUTE
AREA/
HOUR
AUTO
MAN
CAL
RESET
MANAUTO
CALHOLD
V 1 2 3 4
DrillMaster
METER
CAL
ROW
SPACING
ADJUST
RATE
TARGET
RATE
WEIGHT TOTALS
(1) (2) (3)
SPEED
RATE
AREA TOTALS
(1) (2) (3)
DISTANCE
METER
RPM
ROWS/
SECTION
CAL
TEST
TEST
SPEED
SPEED
CAL
WEIGHT /
MINUTE
AREA/
HOUR
AUTO
MAN
CAL
RESET
MANAUTO
CALHOLD
V 1 2 3 4
DrillMaster
METER
CAL
ROW
SPACING
ADJUST
RATE
TARGET
RATE
WEIGHT TOTALS
(1) (2) (3)
SPEED
RATE
AREA TOTALS
(1) (2) (3)
DISTANCE
METER
RPM
ROWS/
SECTION
CAL
TEST
TEST
SPEED
SPEED
CAL
WEIGHT /
MINUTE
AREA/
HOUR
AUTO
MAN
CAL
RESET
MANAUTO
CALHOLD
V 1 2 3 4
DrillMaster
Display indicates counter pair #2 is selected
Display indicates counter pair #3 is selectedDisplay indicates counter pair #1 is selected
CrustBuster
DrillMaster Quick Start Guide
346-001150 Pg 17 Revised 11/2010