Use and Care Manual

1: pick a sunny place to plant
Your rose bush will need at least 6 hours of sun each day,
so choose a sunny spot to plant.
2: dig a large hole
Dig a hole slightly larger than the container. Work the
soil at the bottom of the hole with your shovel so that
it’s loose and aerated.
3: remove rose from its container
Remove the Drift
®
Rose from its container. Use your hands
to gently loosen the roots at the bottom of the plant.
4: plant your rose in ground
Place the plant in the hole, ensuring that the base of the
plant is level with the soil.
PLANTING STEPS for in the garden
5: fill in soil around plant
Add soil back to the hole around the plant. Crumble the
soil so that it is nice and aerated. If desired, mulch around
the plant.
6: water rose until established
Water your Drift
®
Rose thoroughly around the base of
the plant, allowing it to soak in. Repeat as necessary. For
the next couple of weeks, check in and water the plant as
needed to ensure it stays healthy.
DRIFT
®
Roses • www.DriftRoses.com