Quick Start Guide

87
getting started
GETTING READY
1. Open and remove the
rear hatch
2. Insert a formatted Micro
SD card
3. Slide battery into slot
4. Charge the battery for 4
hours before first use
5. Close the rear hatch
POWER UP AND DOWN
1. Press the Select button
to turn the camera on
2. The LED will light up
green, indicating the unit
is on
3. You are ready to record
video or take pictures
4. To power down, press
and hold the Select
button for 3 seconds
USING THE CAMERA
1. Select the desired
recording mode
2. Select the desired
resolution
3. Select Outdoor or Indoor
mode, as appropriate
4. If using the waterproof case
with your Drift HD, ensure
the setting is selected
(Photo mode only)
IMPORTANT Check www.driftinnovation.com to ensure the latest firmware is installed on your device