TDS
9. SURFACE PREPARATION
DRICORE™ PRO Concrete Repair Crack Prep Surface Paste is an ideal bonding agent for multiple surfaces including concrete, brick,
stone, block, and metal. Surfaces must be clean and profiled or textured. New concrete must be a minimum of 28 days old. All dirt, oil,
debris, wax, grease or dust must be removed. Prepare the surface mechanically using a scarifier, sandblast, shot blast, bush hammer
or other equipment that will give the surface profile needed for the application. A roughened surface that exposes the aggregate and/
or pores of the substrate is imperative for good adhesion.
10. CLEAN UP
Clean tools and equipment with Mighty Wipes by Dricore, a biodegradable formula, that removes and neutralizes the epoxy. Do not allow
epoxy to harden on equipment as cured material can only be removed mechanically.
11. SAFETY
Please refer to the SDS for DRICORE™ PRO Concrete Repair Crack Prep Surface Paste published on our Website, www.dri-core.com
or call Dricore for more information at 1-866-767-6374. This TDS sheet is not intended to list all Safety and Health Require-ments
necessary for the installation of these products.
All Health and Safety Requirements required by OSHA shall be followed.
12. WARRANTY
Dricore warrants to the Buyer that this product is in good quality and conforms to the manufacturer’s specifications in force on the date
of manufacturer when used in accordance with the Installation Instructions and when stored as directed in the technical literature.
Manufacturer cannot warrant or guarantee any particular method of use, performance or application under any particular condition and
Buyer is responsible for determining the suitability of intended purpose and assumes all risks therein. Dricore shall not be liable for any
injury, loss, cost of labor or consequential damages either directly, indirectly or incidentally, arising out of the use or misuse of any
product sold by Dricore or another distributor. If the product is proven to be in non-conformance, the Buyers sole remedy shall be a
refund of the purchase price or replacement of product.
DRICORE™ PRO Concrete Repair Crack Prep Surface Paste | Revision Date 09/30/2020
02
TECHNICAL DATA SHEET
1-866-767-6374 | www.Dricore.com
2311 Royal Windsor Drive Unit 2
Mississauga, Ontario, Canada L5J 1K5
P: +1 866 767 6374
E: info@dricore.com
© AGT Products (IP) Inc. All rights reserved. DRICORE™ is a trademark of AGT Products (IP) Inc. Used under license by AGT Products Inc. and AGT Products (USA) Inc.




