TDS

ManualsBrandsDRICORE ManualsBuilding materialsPro Concrete Repair Crack Injection Expanding Foam

24 month shelf life when stored in unopened containers in dry conditions and stored at 40°F-95°F (4°C-35°C)

*NOTE: Epoxy cure is affected by temperature. Low

temperatures will increase cure time, higher temperatures

with decrease cure time.

5. TECHNICAL DATA

1. DESCRIPTION

•Moisture tolerant •Rapid cure formula

•High strength, high modules structural adhesive •Agency Independent testing lab certification

•Made in America •Solvent free

•Convenient 1:1 mix ratio by volume •No-sag gel consistency

DRICORE™ PRO Concrete Repair Crack Prep Surface Paste is a two-component, 100% solids, moisture-insensitive, high strength,

high modulus, multi-purpose liquid epoxy gel adhesive. It meets the current ASTM C881 and AASHTO M235 Types I, II, IV & V Grade 3,

Classes B & C specifications. It has passed 4 million cycles of simulated seismic tension test.

2. WHERE TO USE

Use DRICORE™ PRO Concrete Repair Crack Prep Surface Paste as an adhesive for setting/bonding subsurface or external

reinforcements to concrete masonry or other substrates. It can also be used for reinforcing steel dowels, threaded rods, bolts, and

inserts into existing concrete. Use as a multipurpose bond adhesive for structural bonding fresh or hardened concrete to hardened

concrete, sealing cracks, setting Rhino injection ports prior to injection grouting, and as a pick-proof sealant.

3. ADVANTAGES

4. SHELF LIFE / STORAGE

6. CONDITION PRODUCT

Condition cartridge and contents to a temperature of 65°F to 95°F (18˚C - 35˚C) for easier dispensing.

7. LIMITATIONS & WARNINGS

Minimum substrate temperature is 40˚F (5˚C). Do not thin. Solvents will prevent proper cure.

8. MANUFACTURER’S PRINTED INSTALLATION INSTRUCTIONS

For complete installation instructions on various applications using DRICORE™ PRO Concrete Repair Crack Prep Surface Paste visit

www.dricore.com or call Dricore for more information at 1-866-767-6374.

Mix Ratio 1:1 by volume

Viscosity ¼ inch no-sag gel

Gel Time (60 g mass) 10 minutes

Tack Free Time (73⁰F or 23⁰C) 2 to 3 hours

Tensile Properties (ASTM D638), 7 day cure

Tensile Strength: 7,500 psi (51.7 MPa)

Tensile Elongation: 1.2%

Shear Strength (ASTM D732) 2,800 psi (19.3 MPa)

DRICORE™ PRO Concrete Repair Crack Prep Surface Paste

Storage Conditions: 40˚F – 95˚F (4˚C – 35˚C).

Condition material to: 65˚F – 85˚F (18˚C – 29˚C) before using.

Shrinkage on Cure (ASTM D2566) 0.001

Bond Strength (ASTM C882) 1 day cure: 2,000 psi (13.8 MPa)

7 day cure: 2,500 psi (17.2 MPa)

Compressive Properties (ASTM D695), 7 day cure

Compressive Strength: 12,500 psi (86.2 MPa)

Compressive Modulus: 300,000 psi (2,070 MPa)

Thermal Compatibility (ASTM C884) Pass

Heat Deflection Temperature (ASTM D648) 140˚F (60˚C)

Water Absorption (ASTM D570) 0.1% (24 hr)

DRICORE™ PRO Concrete Repair Crack Prep Surface Paste | Revision Date 09/30/2020

TECHNICAL DATA SHEET

1-866-767-6374 | www.Dricore.com

2311 Royal Windsor Drive Unit 2

Mississauga, Ontario, Canada L5J 1K5

P: +1 866 767 6374

E: info@dricore.com