TDS

10. LIMITATIONS & WARNINGS
• Minimum age of concrete must be 21-28 days from date of placement depending on curing and drying conditions.
• Subject to discoloration upon exposure to UV light
11. MANUFACTURER’S PRINTED INSTALLATION INSTRUCTIONS
For complete installation instructions on various applications using DRICORE™ PRO Concrete Repair Polyurethane Injection Expanding
Foam, visit www.dricore.com or call Dricore for more information at 1-866-767-6374.
12. SURFACE PREPARATION
Remove dust, dirt, grease, laitance, curing compounds and other foreign matter by sandblasting, mechanical abrasion or hydro blasting.
For drilled holes, clean with a nylon bristle brush. Remove all water and dust with clean compressed prior to installation. DRICORE™
PRO Concrete Repair Polyurethane Injection Expanding Foam has a low viscosity to reach most cracks, and upon expansion, will
penetrate all thin cracks.
13. CLEAN UP
Clean tools and equipment with Mighty Wipes by Dricore, a biodegradable formula, that removes and neutralizes the epoxy. Do not allow
epoxy to harden on equipment as cured material can only be removed mechanically.
14. SAFETY
Please refer to the SDS for DRICORE™ PRO Concrete Repair Polyurethane Injection Expanding Foam published on our website, www.dri-
core.com or call Dricore for more information at 1-866-767-6374. This TDS sheet is not intended to list all Safety and Health Require-
ments necessary for the installation of these products. All Health and Safety Requirements required by OSHA shall be followed.
15. WARRANTY
Dricore warrants to the Buyer that this product is in good quality and conforms to the manufacturer’s specifications in force on the date
of manufacturer and when used in accordance with the Installation Instructions and when stored as directed in the technical literature.
Manufacturer cannot warrant or guarantee any particular method of use, performance or application under any particular condition and
Buyer is responsible for determining the suitability of intended purpose and assumes all risks therein. Dricore shall not be liable for any
injury, loss, cost of labor or consequential damages either directly, indirectly or incidentally, arising out of the use or misuse of any
product sold by Dricore or another distributor. If the product is proven to be in nonconformance, the Buyers sole remedy shall be a
refund of the purchase price or replacement of product.
DRICORE™ PRO Concrete Repair Polyurethane Injection Expanding Foam | Revision Date 09/30/2020
02
TECHNICAL DATA SHEET
© 2019 All Rights Reserved
1-866-767-6374 | www.Dricore.com
2311 Royal Windsor Drive Unit 2
Mississauga, Ontario, Canada L5J 1K5
P: [phone]
E: [e-mail]