Instruction manual

12
• To put DashDAQ in Low Power Mode: Press and release the button quickly while the DashDAQ is on. The screen will go off, but
the unit will still be on. Press the button again and the DashDAQ will instantly come back on. Low power mode saves power,
but makes DashDAQ instantly available.
MENU NAVIGATION
When DashDAQ first starts up, a boot screen will appear. Please wait.
Whenever this warning screen appears, read carefully.
To agree and continue, tap the [I Accept] button. If you do not agree to abide by the warning, please disconnect DashDAQ and contact
Drew Technologies for a return authorization.
Tapping the [I Accept] button will bring up the gauge screen:
The [<<] and [>>] arrow buttons at the bottom are used to cycle through different gauge layouts.
The [Exit] button in the lower left corner returns the screen to the main menu for accessing all of DashDAQ’s features.