Instruction manual

45
4. Tap [Change]. This screen appears:
5. Tap [Driver].
6. To select the Dyno Calculator, use the [<] or
[>] buttons to navigate to the “Calculator”
selection.
46
7. Tap [Dyno Calculator] to highlight the Dyno
Calculator driver. Tap [Save].
8. Tap [Save] again. Tap [Save] once more at
the Installed Device setup window.
The Dyno Calculator needs 3 signals to calculate
horsepower and torque: vehicle speed sensor,
vehicle rpm sensor, and vehicle weight. These
variables can be defined in the Parameters menu
from the Main Menu. Here’s how:
1. Tap on [Parameters] from the Main Menu.
2. Navigate to the “d- Dyno Calculator” option
by taping on the [<] or [>] buttons.