User guide

16
Atmel AVR2054
8390B-AVR-12/11
Figure 4-1. The Bootloader PC tool main window.
4.1.3 Using the command line
The co
nsole version of the Bootloader PC tool accepts the following command-line
options (can be entered in any order):
bootloader –f <file_name> –p <com_port>
For example, <com_port> can be set to COM3 to establish connection with the device
via the COM3 port. Besides, when the
-e <eeprom_size> option is specified the
EEPROM section is cleared. To see help information run:
bootloader -h
The GUI version contains interface controls for the same set of options as described
in Table 4-1. The G
UI version window is shown on Figure 4-1.
Table 4-1. Command-line options and corresponding GUI controls.
Command line option GUI control Description
-f Select SREC file
Path to the firmware image of SREC
format to be loaded to device
-p Select Serial port COM port number
-e EEPROM Erase
Clean up EEPROM section. EEPROM size
shall be specified