User guide

Atmel AVR2054: Serial Bootloader User Guide [APPLICATION NOTE]
8390D−WIRELESS−03/2015
4
Table 1-1. Atmel MCUs and corresponding interfaces, boards and modules supported by Serial Bootloader tool.
Atmel MCU
Supported serial
interfaces
Atmel modules
Wireless development
boards/kits
ATSAMR21E18
ATSAMR21G18
USART0,
Configurable
pins
N/A ATSAMR21-XPRO
(1)
ATmega256RFR2
ATmega2564RFR2
ATmega128RFA1
USART0
USART1
TWID
USB_FIFO
ATZB-S1-256-3-0-C [10]
AT256RFR-XPRO
(1)
AT256RFR2-EK
ATRF4CE-EK
ATAVR128RFA1-EK1
ATxmega256A3
USARTF0
USARTD0
SPIE
TWIC
TWIE
N/A
REB2xxED-EK
STK600 + RZ600
ATxmega256D3
USARTD0
TWIC
N/A STK600 + RZ600
ATmega1281
USART0
USART1
USB_FIFO
TWID
N/A RCB230 / 231 / 212
(2)
AT91SAM3S4C USB_DFU N/A deRFusb-23E00
(2)
(1)
Requires connection Flow Control to be set to “Hardware” on the host side.
(2)
Non-Atmel products; see http://www.dresden-elektronik.de for details and purchase.
1.3 Package content and structure
The Serial Bootloader package contains:
• Embedded bootloader sources, including
• Source code and header files
• IAR projects
• Atmel Studio projects
• Makefiles for various configurations
• Pre-compiled firmware images of embedded bootloader
• Installation files for the Bootloader PC tool
• Documentation
• Drivers and utility firmware images
Table 1-2 describes the serial bootloader file structure with paths given relative to the package’s root directory.
Table 1-2. Serial bootloader files and directories.
Path Description
\Documentation\
Documentation folder
\Embedded_Bootloader_images\
Pre-compiled firmware images of embedded bootloader