Programming instructions

Atmel AT02597: ZigBee PRO Packet Analysis with Sniffer [APPLICATION NOTE]
32210A−WIRELESS−09/2013
9
Figure 2-4. Port Settings.
• Once the device is created, it will appear in the device drop-down menu in BitCatcher and shall be selected as
shown below. After device selection, the connect/Disconnect button shall be pressed to begin or end the
usage of the sniffer hardware with BitCatcher
Figure 2-5. Device Selection.
• After the device connection with BitCatcher is established, the user can configure the Channel and Channel
pages supported. Standard IEEE 802.15.4 channels are supported in the 2.4GHz, 868 and 915MHz frequency
bands
• Supported Channels in the 2.4GHz bands are from Channel 11 to channel 26 as per formula,
Fc = 2405 + 5 (k - 11) in [MHz], for k = 11, 12... 26
where k is the channel number.
• Channel 0 is for 868MHz operation and Channels 1 to 10 for 915MHz band. IEEE 802.15.4 -2006 specified
channel pages 0, 2 and 5 are supported
• The Data capture session can be started or stopped using the Play Button in BitCatcher