Programming instructions
Atmel AT02597: ZigBee PRO Packet Analysis with Sniffer [APPLICATION NOTE]
32210A−WIRELESS−09/2013
7
2.
Sniffer Capture Session Setup
This chapter shows the user how to setup a sniffer capture session after the installation of the hardware driver and the
sniffer tool in the PC has been done successfully.
2.1
Wireshark Capture Interface
•
Open Wireshark_Sniffer_Interface.exe from
\Program Files\Atmel\AtmelWiresharkFirmware
•
From the Sniffer Port column, select the Sniffer port number and click Open as shown in Figure 2-1
Figure 2-1. COM Port Selection.
•
As the Sniffer Capture interface supports 2.4GHz channels, the user can select a channel from Channel 11 to
Channel 26
•
After the channel is set, click Start to begin the capture session as shown in Figure 2-2. A Wireshark instance
will be invoked automatically