Programming instructions

Atmel AT02597: ZigBee PRO Packet Analysis with Sniffer [APPLICATION NOTE]
32210A−WIRELESS−09/2013
32
Figure 6-1. Link Key Establishment Between Two Routers
Trust Center uses the Transport Key command to send the link key to both the routers. The link key is applied in further
data exchange between the routers. #3678 uses this link, as seen in the packet view -> apsMic-> Key.
6.3 ZLL – ZHA Interoperability
It is possible for a ZigBee Home Automation device to join a ZLL network. The sniffer log, ZLL_HA_S_L_GW.dcf, shows
an occupancy sensor device joining a ZLL network at packet #305.
It does a classical join and service discovery for the occupancy sensing cluster ID,0x0406.The Profile ID can be
observed to be 0x0104(Home Automation Profile).
The occupancy sensor then periodically reports the value of the occupancy sensing attribute to the ZLL light.