Programming instructions

Atmel AT02597: ZigBee PRO Packet Analysis with Sniffer [APPLICATION NOTE]
32210A−WIRELESS−09/2013
20
Without a proper setting of the CS_UID parameter, a node tries to repeatedly join the network
CS_ZDO_JOIN_ATTEMPTS times unsuccessfully.
Figure 4-6. Node Tries to Join Network Without Proper Setting of IEEE Address.
4.3 Network Rejoin with and without PDS
There are multiple join options that can be configured using BitCloud as mentioned in [1].
Network rejoin method is used when a node wishes to join a network with knowledge of networking parameters such as
the network’s extended PANID or application-assigned short address, operating channel or others.
Figure 4-7 shows e
xamples of several successful network rejoin procedures.